【ABS+】 ABS+ is an improved version of ABS with higher strength, toughness and better heat resistance, wear and impact resistance. The material is compatible with most 3D printers.
【Stable dimensional tolerance】 minimum tolerance and small shrinkage - ensure consistent administration and stable prints, no clogging, extremely high print success, resulting in printed parts, that have an excellent finish and are very accurate. (depending on the printer)
【Without knocking and clogging 】 1kg coil contains approximately 410-425 m filament. Material with excellent circularity and very low tolerance of the diameter, does not overlap or get tangled. It melts, does not crack, does not contain bubbles. Print smoothly and repeatedly without blocking a nozzle or extruder.
【Vacuum enclosed packaging】 Clean mass weight: 1 kg.
ESUN FILAMENT SELLED IN A RESEALABLE PACKAGING, which keeps it dry and out of dust and foreign particles, prevents nozzles and provides smooth 3D models.
- string diameter: 1.75 ± 0.03 mm
- design length: 410-425 m
- coil size: diameter 200 mm - width 64 mm - center hole 57 mm
- pack size: 216 x 202 x 76 mm
- weight Package: 1,48 kg
- nozzle temperature: 220-260 ℃
- pad temperature: 90-110 ℃
- density: 1.06 g / cm3
- melt Flow Index: 15 (220 ° C / 10kg) g / 10min
- tensile strength: 40 MPa
- extension at a quarry point: 30%
- bend strength: 68 MPa
- fault strength module: 2443 MPa
- notch toughness: 42 kj / ㎡
- deformation temperature: 73 (° C, 0.45MPA)
- manufacturer: Esun
Doplňující informace
| Kategorie: | ABS |
| Barva: | zelená, modrá, šedá, hnědá, růžová, natural, stříbrná |
| Váha materiálu: | 1 kg |
| Průměr: | 1,75 mm |
| Přesnost struny: | ± 0,03 mm |
| Teplota podložky: | 90 - 110° C |
| Teplota trysky: | 220-260°C |
zł76,33
zł63,08 bez DPH
