Photos are illustrative. The material has identical PLA colors from FIBER3D.
Quality printing material brand FIBER3D guaranteeing trouble-free printing.
S-PLA Filament for use in 3D printers is very solid and does not exclude chemical odor when printing. It is an E biodegradable material, as it is made of renewable natural sources. Large components are easier to print from this material.
Material description : PLA, Polylactic acid, polylontic acid is bioplastic made of corn starch with the same properties as plastic made of oil. This plastic is much more gentle on nature than ABS. Tetrahydrofurene soluble, possible long -term exposure to acetone can cause the surface to etrane. It is not healthy and is degradable in nature -controlled composting. Compared to ABS, the material strength is higher, the material is better printable, the only disadvantage is the lower temperature resistance. PLA can be actively cooled during printing, it does not need a heated pad. PLA processing temperature is 210 - 230 ° C.
Storage : We recommend securing a dry environment. In poor storage in a humid environment, it absorbs moisture, which manifests itself as bubbles on the surface. Protect from heat.
Main advantages of S-Pla :
- small shrinking in cooling - no heated pad or chamber
- good print quality even when printing at high speed
- biodegradable material
Weight incl. Packaging : 1,36 kg; outer coil diameter : 200 mm; center hole diameter : 75 mm; coil Width : 64 mm.
Empty coil weight approx: thinner 130 g, coarser 144 g, transparent 132 g
Mass flow : 3 - 6 g/10 min (190 ° C)
Material is supplied in cardboard box , vacuum wrapped together with silica gel that absorbs moisture.
Supplied in several colors.
Additional information
| Category: | PLA |
| Barva: | transparentní, fialová, oranžová, žlutá, zelená, modrá, červená, bílá, černá, šedá, přírodní |
| Váha materiálu: | 1 kg |
| Průměr: | 1,75 mm |
| Přesnost struny: | ± 0,02 mm |
| Teplota podložky: | 0 - 60° C |
| Teplota trysky: | 210 - 230° C |
$12.35
