Commodity plastic is now available for 3D printing. Vyni 303 offers you great mechanical features, stamina and impact resistance.
Properties:
tensile strength 46.1 MPa 13.1%
hardness 78 shore d
heat resistance (vicat) 71 ° C
Thermal stability & gt; 40 min (200 ° C)
advantages
• Perfect workability and perfect features
- Available plastic in the form of fibers!
• high quality 3D printing
- functionality, toughness, stiffness
• Excellent printing properties
- strong levels of levels and better adhesion of the first layer
• mechanical properties
- tensile strength, hardness, impact resistance
• Improved thermal Stability
- Basic PVC resists 20 minutes to 71 ° C
• Excellent for prototyping
low adsorption of moisture
• Chemical resistance
- resistant to oils, salts, solution, Water
• In accordance with the Rohs Directive
- Safe for use in electrical and electronic devices
• recyclable, without styrene
print settings
print temperature: 215-230 ° C
bed temperature: 80 ° C
print speed should be in the range of 40-60 / with
After printing, remove the fiber to prevent degradation in the nozzle. It should not remain in the nozzle for a longer period of time at elevated temperature. Ventilate the room during printing, harmful fumes are released. Fumes can affect your stainless steel parts of the 3D printer. The layer must be high enough to prevent the nozzle from clogging.
Use Magigoo or 3dlac to strengthen adhesion to the print pad!
Warning! Toxic vapors are excreted during printing. Observe safety recommendations!
Additional information
| Category: | Samples, swatches |
| Barva: | černá |
| Průměr: | 1,75 mm |
| Přesnost struny: | ± 0,05 mm |
| Teplota podložky: | 80°C |
| Teplota trysky: | 215 - 230°C |
$4.94