Tools
-
Add to FavouritesTorque wrench with nozzle attachments
With a torque wrench, you can tighten the nozzle quickly and accurately. You will improve the quality of the hotend assembly and prevent unwanted filament leakage around the thread. Using a preset torque, always tighten the nozzle with the same force.
In stock <10pcs
28,10 €
-
Add to FavouritesTrimming knife and spare blades
The set is designed especially for accurate plastic trimming. Suitable especially for PLA, PETG, ABS, PEI, Peek, carbon fiber, as well as stainless steel, aluminum alloy, rubber. The product is available in three variants: only knife / spare blade / knife and spare blades.
In stock <10pcs
from 7 €
-
Add to FavouritesDigital sliding scale 150 mm
Digital sliding scale for 0-150 mm with a large LCD display, zero settings in each position and automatic shutdown after 5 minutes of inactivity. Plastic Surgers for Orientation Fast Measurement
On demand
8,76 €
-
Add to FavouritesTeflon tube cutter
Filament cutter with simple use. Suitable for PTFE hoses of all diameter 2 3 4 6 mm
In stock >10pcs (13 pcs)
2,43 €
-
Add to FavouritesStripper - knife on PTFE hose - removal of cable insulation
Pliers to strip cables and cut the teflon tube.
In stock <10pcs (6 pcs)
1,37 €
-
Add to FavouritesKettle pliers combined
Kettle pliers with round tips. Suitable for wire and fine workshop work.
In stock >10pcs (25 pcs)
2,78 €
-
Add to FavouritesVallejo T03002 set of 5 diamond files with handle
Vallejo T03002 set of 5 diamond files with handle
1-7 days (10000000 pcs)
16,49 €
-
Add to FavouritesFilament welding
Filament welding product available in two dimensions. Dimensions 1.75 mm and 3.0 mm. The welding product is used to connect the ends of the strings to make the most of the coil content.
Sold out
from 10,51 €
-
Add to FavouritesSpatula for removing prints
Spatula made of stainless steel with an ergonomically shaped handle for comfortable holding.
Sold out
5,24 €
-
Add to FavouritesIMBUS 2.5 mm with a ball
Imbus with a ball for wide use and in less accessible places. Made of quality steel, hardened.
Sold out
0,53 €
-
Add to FavouritesSet of modeling tools - spatula
Model stainless steel spatula to remove prints.
Sold out
7 €
-
Add to FavouritesA set of drills to clean the nozzles
The set contains 10 pieces of drills with a diameter of 0.2 mm or 0.4 mm used to clean the nozzles. When blocking the nozzle, heat it to about 200 ° C and then clean the clockwise with a gentle circular movements with a drill.
In stock <10pcs
8,05 €
-
Add to FavouritesNozzles
Drills with a diameter of 0.2 mm / 0.25 mm / 0.3 mm / 0.35 mm / 0.4 mm / 0.45 mm / 0.5 mm used to clean the nozzles. When blocking the nozzle, heat it to about 200 ° C and then clean the clockwise with a gentle circular movements with a drill.
In stock <10pcs
0,67 €
-
Add to FavouritesCNC BITS - Set of 5 pcs for Snapmaker
A set of five CNC bits (shaft diameter 3.175 mm) for Snapmaker 2.0
On demand
13,33 €
-
Add to FavouritesKnife Pro accurate cutting of PTF hoses
Knife for accurate cutting of PTF hoses
1-7 days (10000000 pcs)
3,48 €