Fiberlogy
118 products
-
Add to FavouritesFIBERFLEX FILAMENT Black 30D 1.75mm Fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 30D Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. Thanks to its material properties, it is destined for use to places that require frequent bending.
1-7 days (10000000 pcs)
35,81 €
-
Add to FavouritesEASY PLAIMENT ONYX 1,75mm Fiberlogs 850g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
20,75 €
-
Add to FavouritesEASY PLAYENT VERTIGO 1,75mm Fiberlogs 850g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
17,27 €
-
Add to FavouritesPetg Easy Filament Refill Gray 1,75mm Fiberlogs 850g
Fiberlog refill is an environmentally friendly solution because it is a string without a coil. The Pet-G Refill material is the same as the classic Fiberlog PET.
1-7 days (10000000 pcs)
17,44 €
-
Add to FavouritesEASY PLAYENT AURORA 1,75mm Fiberlogs 850g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
20,75 €
-
Add to FavouritesFIBERFLEX 40D FILAMENT VERTIGO 1,75mm Fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 40d Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. In addition, it is highly resistant to low temperatures, and also resistant to abrasion and chemicals.
1-7 days (10000000 pcs)
37,99 €
-
Add to FavouritesNylon PA12 + CF15 Black 1,75mm 500g Fiberlogs
PA12 + CF is a modification of the already durable Nylon fiber PA12, which was reinforced by adding 15 % carbon fibers. PA12 + CF is characterized by high thermal resistance and smaller shrinking compared to the unmodified Nylon PA12. The application of carbon fibers makes it possible to reduce the weight of the component while maintaining high structural stiffness.
1-7 days (10000000 pcs)
41,67 €
-
Add to FavouritesFiberflex Filament Yellow 30D 1.75mm Fiberlogs 850g
Fiberflex Filament Yellow 30D 1.75 mm Fiberlogs 850 g. Fiberflex is a thermoplastic elastomer with a hardness of 30D Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. In addition, it is highly resistant to low temperatures, also well -resistant abrasion and chemicals.
1-7 days (10000000 pcs)
35,81 €
-
Add to FavouritesPetg Easy Filament Refill White 1,75mm Fiberlogs 850g
Petg Filament Refill White 1.75 mm Fiberlogs 850 g. Refill from Fiberlogy is an environmentally friendly solution on our market, as it is a press string without a coil. Using Pet-G Refill saves and at the same time reduce the environmental impact! The Pet-G Refill material is the same as the classic Fiberlog PET.
1-7 days (10000000 pcs)
14,53 €
-
Add to FavouritesEASY PLAYENT GRAYS 1,75mm Fiberlogs 2500g
EASY PLALAMENT Gray 1.75 mm Fiberlogs 2 500 g. One of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
56,06 €
-
Add to FavouritesFiberflex Filament beige 30d 1.75mm Fiberlogs 850g
Fiberflex Filament beige 30d 1.75 mm Fiberlogs 850 g. It is a thermoplastic elastomer that is highly resistant to low temperature impacts.
1-7 days (10000000 pcs)
35,81 €
-
Add to FavouritesFiberflex Filament Orange 30D 1,75mm Fiberlogs 850g
Fiberflex Filament Orange 30D 1.75 mm Fiberlogs 850 g. It is a thermoplastic elastomer that is highly resistant to low temperatures.
1-7 days (10000000 pcs)
35,81 €
-
Add to FavouritesFiberflex Filament pink 30D 1.75mm Fiberlogs 850g
Fiberflex Filament Pink 30D 1.75 mm Fiberlogs 850 g. It is a thermoplastic elastomer that is highly resistant to low temperature impacts.
1-7 days (10000000 pcs)
41,10 €
-
Add to FavouritesFiberflex Filament Red 30D 1.75mm Fiberlogs 850g
Fiberflex Filament Red 30D 1.75 mm Fiberlogs 850 g.
1-7 days (10000000 pcs)
35,81 €
-
Add to FavouritesWood Filament Carmine 1,75mm Fiberlogs 750g
Wood Filament crimson 1.75 mm Fiberlogs 750 g. Natural appearance, beautiful surface surface that offers a wide range of uses, not only for works of art and design elements.
1-7 days (10000000 pcs)
37,32 €