Quality printing material brand FIBER3D .
Thermo orange white (Thermo Orange White) is a special filament, which responds to the ambient temperature by changing color, ie at normal operating temperature is orange, at higher temperatures it is almost white. As a classic PLA is a very strong material, biodegradable, which does not exclude chemical odor during printing.
Material description : PLA, Polylactic acid, polylontic acid is bioplastic made of corn starch with the same properties as plastic made of oil. O against classic PLA material is complemented by increased temperature sensitivity. When the temperature is changed, it reacts by changing the color - from orange to white. This feature can be used wherever you need to check for overheating of components and other components. The PLA processing temperature is 190 - 220 ° C.
Storage: Store in a dry way. Protect from heat.
Main advantages of material :
- when temperature changes reacts by changing color
- Small shrinking when cooling - no heated pad or chamber
- good print quality even when printing at high speed
- soluble in sodium hydroxide
- Biologically degradable material
Weight incl. Packaging: 1,36 kg; Outer coil diameter: 200 mm; Center hole diameter: 75 mm; Coil width: 64 mm.
Weight of empty coil approx: thinner 130 g, coarser 144 g, transparent 132 g
Mass flow : 5 - 6 g/10 min (190 ° C)
The material is supplied in cardboard box , or without box, vacuum wrapped together with silica gel that absorbs moisture.
|Váha materiálu:||1 kg|
|Přesnost struny:||± 0,02 mm|
|Teplota podložky:||0 - 60° C|
|Teplota trysky:||190 - 220° C|