Quality printing material brand FIBER3D .
PLA Marble Filament with pigment particles ensures after printing the appearance of stone, marble. Chemical odor is not excreted during printing, the material is biodegradable.
Material description : as well as classic PLA (polylactic acid), this PLA is a marble filament of bioplastic produced from corn starch. It has similar properties to plastics that are made of oil. This material is soluble with tetrahydrofurene, long-term exposure to acetone causes the surface etching. The disadvantage is lower temperature resistance. It can be actively cooled during printing and does not need a heated pad. The PLA processing temperature is 190 - 220 ° C.
Surface treatment: The material cannot be easily grinded, as this activity causes heat that causes "pulling" fibers from prints. It is therefore advisable to cool the print.
Storage: Secure a dry environment. Protect from heat.
Main advantages of material :
- after printing the appearance of the stone, marble
- small shrinking in cooling - no heated pad or chamber
- good print quality even when printing at high speed
- soluble in sodium hydroxide
- biodegradable material
- non-toxic, safe
Weight incl. Packaging: 1,36 kg; Outer coil diameter: 200 mm; Center hole diameter: 75 mm; Coil width: 64 mm.
Empty coil weight approx: thinner 130 g, coarser 144 g, transparent 132 g
Material is supplied in cardboard box or without a box, vacuum wrapped with a silica gel that absorbs moisture.
Additional information
| Category: | PLA |
| Barva: | mramor |
| Váha materiálu: | 1 kg |
| Průměr: | 1,75 mm |
| Přesnost struny: | ± 0,02 mm |
| Teplota podložky: | 0 - 60° C |
| Teplota trysky: | 190 - 220° C |
$18.34
