Pla Silk Filament Pearl Pearl White 1,75mm Spectrum 1kg

Spectrum Pla Silk is a PLA-based fiber with colored additives that give printed models a very glossy satin surface, which significantly reduces the visibility of layers of printed products. By using a specially developed pigment, it is possible to maintain classic PLA properties, ie simple and trouble -free printing, when achieving very low shrinking and relatively high tensile strength. This material is therefore designed for those who appreciate simple printing and very high aesthetic properties.

satin gloss on the entire surface of printed objects will ensure reduced visibility of the layers of printed surfaces Other parameters and mechanical properties has the same as standard Pla.

Color: white

Diameter: 1.75 mm
Dimensional tolerance: ± 0.05 mm
Print temperature: 185-230 ° C
Heated pad: no need
Weight: 1 , 00 kg
Total weight including: 1.40 kg
coil dimensions: outer diameter 20 cm, inner diameter 5.2 cm, width 7.5 cm

Physical and thermal properties of raw material
density: 1,24g /cm ^{3
MFR (210 ° C /2,16 kg), g /10 min: 6 (D1238)
Heat deformation temperature: 55 ° C
Tensile strength at: 53 MPa (Astm D882)
Tensile strength: 60 MPa (Astm D882)
The draft module: 3.5 MPa (Astm D882)
Shocking toughness: 16 J /M (Astm D256)}

Eng

Visibility of Layers of Printed Products. By using and specially developed pigment, it is possible to maintain the Classic Properties of Pla, IE Simple and Trouble-Free Printing, While Achieving Very Low Shrinkge and relatively High Tensile Strength. This Material Is TherFore Intented for Those Who Appreciate Simple Printing and Very High Aesthetic Properties. Satin Gloss on the Entire Surface of Printed Objects Will Provide You With Reduced Visibility of Layers of Printed Surfaces, Other Parameters and Mechanical Properties HAVE The same as Standard PL. DUE TO ITS APPEARANCE, This Product Is Very Suitable for Printing Decorative Objects and Interior Design.

White Color

Diameter: 1.75 mm

Dimensional tolerance: ± 0.05 mm

Print Temperature: 185-230 ° C

Heated Bed: Not Required

Weight: 1.00 kg

Total Weight Including Packaging: 1.40 kg

COIL DIMENSIONS: Outer Diameter 20 cm, Inner Diameter 5.2 cm, Width 7.5 cm

Physical and Thermal Properties of Raw Materials

DENSITY: 1.24 G / CM3 MFR (210 ° C / 2.16 kg), g / 10 min: 6 (D1238)

Heat deformation temperature: 55 ° C

Tensile Strength at Break: 53 MPa (ASTM D882)

Tensile Strength: 60 MPa (Astm D882)

Tensile Modulus: 3.5 MPa (Astm D882)

Impact Strength: 16 J/M (Astm D256)