na3D
379 products
-
Add to FavouritesQuick coupling for Bowden 6/4
Quick-coupler for bowdencupler to connect PTFE hose. Brass quick coupling with tubular thread R1/8 ". The couplings are used for air conditioning and in 3D printing it is used to guide the filament in the bowden.
Sold out
2 €
-
Add to FavouritesQuick coupling for Bowden 4/2 - thread M6
Quick-coupler for Bowden, Cupler to connect PTFE hose, brass quick coupling with thread M6x1. The couplings are used for air conditioning and in 3D printing it is used to keep the filament in the bowden. PC4-M6 PC4 clutch.
Sold out
2 €
-
Add to FavouritesAluminum heated pad 314x314x3
Heatbed pad for better printing of demanding materials. Breathtaking size 30x30cm. We recommend for use on cube printers. Scube, Hypercube Evo and others
Sold out
33,85 €
-
Add to FavouritesStep motor 0.28 nm
The 0.28nm stepper engine serves as an alternative replacement for SX17-1003VLQCEF engines. The engine is suitable for use on XYZ axes for extruder we recommend a stronger version.
Sold out
11,83 €
-
Add to FavouritesStep motor 0.56 nm
The 0.56nm stepper engine serves as an alternative replacement for SX17-1005VLQCEF engines. The engine is suitable for use on all axes.
Sold out
10,13 €
-
Add to FavouritesStep motor 0.52 nm
The 0.52nm stepper engine serves as an alternative replacement for SX17-1005VLQCEF engines. The engine is suitable for use on all axes.
Sold out
11,83 €
-
Add to FavouritesLML8UU LM8ULU linear bearing
LM8UU extended bearing. Avoid problems with the misalignment of two short bearings and install one long for better stability. (The product can be ordered after 1 piece, the photo is only illustrative.)
Sold out
2 €
-
Add to FavouritesTitan extruder
Titan Extruder is a converted universal plastic extruder! Thanks to the gears, the extruder has greater power for material administration.
Sold out
13,52 €
-
Add to FavouritesOrange Pi One
Orange Pi One H3 Quad-core 1.2GHz, 512RAM Ubuntu Linux Android mini PC Raspberry Pi 2
Sold out
44,02 €
-
Add to Favourites
Orange Pi PC Plus
Orange Pi PC Plus H3 Quad-core 1.6GHz, WIFI, 1G RAM Ubuntu Linux Android mini PC Raspberry Pi 2 Pi PC Plus Orange H3 Quad-core 1.6GHz, WIFI, 1G RAM Ubuntu Linux Android mini PC Raspberry Pi Pi 2 KompatibilníOrange PC Plus H3 Quad-core 1.6GHz, WIFI, 1G RAM Ubuntu Linux Android mini PC Raspberry Pi 2 Compatible
Sold out
67,73 €
-
Add to Favourites
Orange Pi Lite
Orange Pi Lite H3 Quad-core 1.2GHz, WIFI, 512M RAM Ubuntu Linux Android mini PC Raspberry Pi 2 Compatible
Sold out
50,79 €
-
Add to FavouritesTrapezoid bolt T8x2
The trapezoid bolt has more accurate production tolerances than classic metric threads. The screw is the size of the T8x2. Without matrix - choose a classic nut or a spring with a spring to delimit the clearance.
Sold out
from 4,37 €
-
Add to FavouritesTL - Smoother - step smoother
Board with 8 diodes for the smoothness of the stepping signal. Using this plate you will get a higher quality print surface. Designed for DRV8825 drivers - you may not notice the difference on others.
Sold out
3,35 €
-
Add to FavouritesAluminum heated pad 220x220x3
Heatbed- heated pad 220 x 220 x 3 mm. Aluminum with PCB layer ensures better thermal conductivity, which prevents the corners from the print. Power 140 W. The pad is a replacement for Anet A8 printers. A6, Ender 3.
Sold out
18,60 €
-
Add to FavouritesExternal MOSFET v1.0
External MOSFET V1.0 with extra large cooler for better pad temperature control. Thanks to the module, you avoid a lot of heating problems. Maximum current 30A.
Sold out
11,83 €