【EPAHT-CF】 EPAHT-CF or nylon with carbon fibers resistant to higher temperatures, consisting of 85 % nylon and 15 % carbon fibers. This material has high toughness, wear resistance. Temperature resistance up to 150 ° C, short -term up to 180 ° C. The material is compatible with most 3D printers.
【Stable dimensional tolerance】 minimum tolerance and small shrinkage - ensure consistent administration and stable prints, no clogging, extremely high print success, resulting in printed parts, that have an excellent finish and are very accurate. (depending on the printer)
【Without knocking and clogging 】 750 g coil. Material with excellent circularity and very low tolerance of the diameter, does not overlap or get tangled. It melts, does not crack, does not contain bubbles. Print smoothly and repeatedly without blocking a nozzle or extruder.
【Vacuum -closed packaging】 Clean mass weight: 750 g. Filament from ESUN is supplied with a drunk bag that keeps it dry and out of dust and foreign particles prevents clogging nozzle and provides smooth 3D models.
- string diameter: 1.75 ± 0.03 mm
- coil size: diameter 200 mm - width 64 mm - center hole 57 mm
- pack size: 216 x 202 x 76 mm
- weight Package: 1,48 kg
- nozzle temperature: 260-300 ℃
- pad temperature: 80-90 ℃
- density: 1.24 g / cm3
- melt flow Index: 6 (250 ° C / 5 kg) g / 10min
- tensile strength: 85 MPa
- extension at a quarry point: 26%
- bend strength: 122 MPa
- fault strength module: 5160 MPa
- notch toughness: 15.5 kj / ㎡
- deformation temperature: 120 (° C, 0.45MPA)
- manufacturer: Esun
|Category:||PA - nylon|
|Barva:||černá, natural, s uhlíkem|
|Váha materiálu:||0,75 kg|
|Přesnost struny:||± 0,03 mm|
|Teplota podložky:||80 - 90°C|