FIBER3D material ensuring trouble-free printing.
PLA MATERIAL For use in 3D printers is very strong and does not exclude chemical odor when printing. PLA is biodegradable - made of renewable natural resources. PLAs helps to print large components more easily.
Material description: PLA, Polylactic Acid, Polymonic acid is a bioplastic made of corn starch with the same properties as plastic made of oil. This plastic is much more gentle on nature than ABS. Tetrahydrofurene soluble, possible long -term exposure to acetone can cause the surface to etrane. PLA is not healthy and is degradable in nature -controlled composting. Compared to ABS, the material strength is higher, the material is better printable, the only disadvantage is the lower temperature resistance. PLA can be actively cooled during printing, it does not need a heated pad. The PLA processing temperature is 190 - 220 ° C.
PLA: The material cannot be easily sanded, grinding (friction) produces heat that causes "pulling" fibers from prints. Therefore, it is advisable to cool the printout for example by grinding it under water. For the same reason, holes are difficult to drill into the print (again the problem with warming up). It is advisable to spray the material first (used in modeling) and then grind, spray again and over and over until the model is perfect for us and then spray it with paint. The resulting model can also be inserted into the "tissue" along with shells, stones, remnants of filaments or pieces of prints.
Storage: We recommend securing a dry environment. In poor storage in a humid environment, it absorbs moisture, which manifests itself as bubbles on the surface. Protect from heat.
Main advantages of PLA:
- simple Settings for printing
- small shrinking when cooling - no heated pad or chamber
- good print quality even when printing at high speed
- soluble in sodium hydroxide
- biologically degradable material
The material is supplied in a cardboard box, vacuumly wrapped with a silica gel that absorbs moisture.
Supplied in a wide range of colors 39 shades.
10 -meter sample (+/- 1 meter - packed manually)
Availability: on order - samples will be available within 3-4 weeks of ordering.
Warning: samples are intended for immediate use.
More from category
Additional information
Category: | Samples, swatches |
Barva: | transparentní, fialová, oranžová, žlutá, zelená, modrá, červená, béžová, bílá, černá, šedá, hnědá, růžová, natural, přírodní, zlatá, multicolor, stříbrná |
Váha materiálu: | vzorek |
Průměr: | 1,75 mm |
Přesnost struny: | ± 0,02 mm |
Teplota podložky: | 0 - 60° C |
Teplota trysky: | 190 - 220° C |
![Sample FIBER3D PLA Filament 1.75 mm 10 m for 3D pen Sample FIBER3D PLA Filament 1.75 mm 10 m for 3D pen](/resize/e/800/800/files/shop/filament/prasata/white.jpg)
0,67 €