na3D
400 products
-
Add to FavouritesV6 aluminum cube
Spare heating block for nozzles E3D V6. The cube has a screw for thermistor insurance.
Skladem 100 až 500 ks (132 pcs)
1,02 €
-
Add to FavouritesRod fixing ring
Fixing ring to secure the rod. It can also serve to define the distance on the rod. Dimensions: 8 mm / 10 mm / 12 mm. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem 100 až 500 ks
0,67 €
-
Add to FavouritesBrass nozzle V6 - Czech Product
Brass nozzle produced by our society in the Czech Republic. The nozzle has an M6 thread, which is the most widespread thread used in 3D printers. The nozzle can be used in several types of 3D printers, most often in printer printers. Made in the Czech Republic.
Skladem 100 až 500 ks
3,48 €
-
Add to FavouritesFan 40 x 40 x 20 - Axial 4020
Axial fan 40 x 20 mm. Multipurpose fan with 24 V power supply. Silent fan with good power.
Skladem 100 až 500 ks
2,07 €
-
Add to FavouritesDisposable drape - 3 layer
Disposable drape for protection against droplets. Powned clip for better adhesion around the nose.
Skladem 500 až 1000 ks (600 pcs)
0,88 €
-
Add to FavouritesPlastic bearing RJMP-01-08 LM8UU
Plastic case RJMP-01-08 to silence your printer. With these cases and better drivers, you don't even know the printer is in operation. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem 500 až 1000 ks (766 pcs)
1,37 €
-
Add to FavouritesMechanical lever sensor
Minispitch with three pins lever.
In stock >1000pcs (1877 pcs)
0,18 €
-
Add to FavouritesMatrix to T profiles 2020
Matrix for profiles 2020. Matrix thread is M3, M4 and M5. The nuts can be inserted into the profile at any time.
In stock >1000pcs
0,16 €
-
Add to Favourites
Matrix to T profiles 3030
Matrix for profiles 3030 HS-30 etc. The thread in the matrix is M6 M5 M4 m3. The nuts can be inserted into the profile at any time.
In stock >1000pcs
0,21 €
-
Add to FavouritesThreaded insert M2 M3 M4
NA3D threaded inserts have a special spiral outline that ensures the best possible hold. Inserts made of high quality brass have excellent thermal conductivity and corrosion resistance.
In stock >1000pcs
from 0,04 €
-
Add to FavouritesArduino Pro Mini
Arduino Pro Mini is used to start the smallest projects.
Sold out
3,83 €
-
Add to FavouritesArduino Mega 2560
Arduino Mega is an ideal board for larger projects that brings new possibilities. Greater performance, more pins, more space for your projects is Arduino Mega 2560. It is a clone with CH340 ballast.
Sold out
10,51 €
-
Add to FavouritesMinitronics v1.1
Smart 3D printer solutions, easy usability and affordability This is minitronics.
Sold out
52,71 €
-
Add to FavouritesHotend 2in1 two-color hotend
Single nozzle hotend for color mixing. 2 colors in one output. Including heating element (40W), thermistor and fan. Voltage according to choice 12 or 24 V.
Sold out
14,03 €
-
Add to FavouritesStepper motor 0.56Nm with integrated T8x8 trapezoid and nut
0.56 Nm stepping motor with integrated T8x8 trapezoidal screw - length 420 mm - including matching nut - it is recommended to replace the nut with a nut with a spring to limit the clearance. Thanks to the integrated screw, you don't have to use flexible couplings or connections with different tubes.
Sold out
22,82 €