na3D
501 products
-
Add to FavouritesNylon tightening sleeve for cables
Protection of your cables! With nylon sleeves you tie cables to ensure their protection.1 piece = 1 meter
Skladem 100 až 500 ks
from 0,84 €
-
Add to FavouritesCoil large
Spare spool for 1 kg of filament, suitable for e.g. rewinding a badly wound spool. The photo is for illustration only, a coil of different manufacturers will be supplied according to current availability. Coil diameter 20 cm, inner diameter 5.3 cm.
Skladem 100 až 500 ks (104 pcs)
0,50 €
-
Add to FavouritesV6 aluminum cube
Spare heating block for nozzles E3D V6. The cube has a screw for thermistor insurance.
Skladem 100 až 500 ks (110 pcs)
0,97 €
-
Add to FavouritesRod fixing ring
Fixing ring to secure the rod. It can also serve to define the distance on the rod. Dimensions: 8 mm / 10 mm / 12 mm. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem 100 až 500 ks
0,64 €
-
Add to FavouritesRadial Turbo fan 4020 40 x 20 mm
Radial fan diameter 40 mm, thickness 20 mm. 12 or 24 V.
Skladem 100 až 500 ks
3,98 €
-
Add to FavouritesCable of step engine JST XH
Cable for engines 0.28 Nm, 0.44 Nm, 0.56 Nm. 2 meters long cable to stepper engine. The cable is equipped with endings. On the one hand the ending for the engine (terminal ph2.0) on the other side of the JST-XH 2.54 (SKR, MKS, etc. control boards).
Skladem 100 až 500 ks
from 1,31 €
-
Add to FavouritesMatrix to T profiles 3030
Matrix for profiles 3030 HS-30 etc. The thread in the matrix is M6 M5 M4 m3. The nuts can be inserted into the profile at any time.
Skladem 100 až 500 ks
0,20 €
-
Add to FavouritesBrass nozzle V6 - Czech Product
Brass nozzle produced by our society in the Czech Republic. The nozzle has an M6 thread, which is the most widespread thread used in 3D printers. The nozzle can be used in several types of 3D printers, most often in printer printers. Made in the Czech Republic.
Skladem 100 až 500 ks
3,31 €
-
Add to FavouritesQuick coupling for Bowden 6/4
Quick-coupler for bowdencupler to connect PTFE hose. Brass quick coupling with tubular thread R1/8 ". The couplings are used for air conditioning and in 3D printing it is used to guide the filament in the bowden.
Skladem 100 až 500 ks (200 pcs)
1,97 €
-
Add to FavouritesQuick coupling for Bowden 4/2 - thread M6
Quick-coupler for Bowden, Cupler to connect PTFE hose, brass quick coupling with thread M6x1. The couplings are used for air conditioning and in 3D printing it is used to keep the filament in the bowden. PC4-M6 PC4 clutch.
Skladem 100 až 500 ks (183 pcs)
1,97 €
-
Add to FavouritesFan 40 x 40 x 20 - Axial 4020
Axial fan 40 x 20 mm. Multipurpose fan with 24 V power supply. Silent fan with good power.
Skladem 100 až 500 ks
1,97 €
-
Add to FavouritesCorner connector for aluminum profiles 20 2020 2040
Couplings for S6BBR20 aluminum profiles. Packaging of 1 pc.
Skladem 100 až 500 ks (327 pcs)
1,31 €
-
6,66 €
70%
Add to FavouritesIndikátor vlhkosti
Indikátor vlhkosti slouží k zjištění vlivu okolního prostředí na skladované zboží např. na filamenty, je vyroben ze speciálního savého papíru s impregnací.
Skladem 100 až 500 ks (134 pcs)
1,97 €
6,66 € Discount 70.4%
-
Add to FavouritesDisposable drape - 3 layer
Disposable drape for protection against droplets. Powned clip for better adhesion around the nose.
Skladem 500 až 1000 ks (600 pcs)
0,84 €
-
Add to FavouritesPlastic bearing RJMP-01-08 LM8UU
Plastic case RJMP-01-08 to silence your printer. With these cases and better drivers, you don't even know the printer is in operation. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem 500 až 1000 ks (690 pcs)
1,31 €